Information for Installation
Important: You should not hang a wall hung vanity unit without ensuring the wall has appropriate support internally by way of timber support noggins.
Most of our vanity units in the Indulgence Range and the Euro Designer Range have solid 18mm backs on them and as such require the water points to have 45mm of half inch thread from the existing plaster or tiled wall.
Additional fixing screws can be used to secure the wall hung vanity units if required. If fixing the vanity unit to a brick wall or solid concrete you may need to use dynabolts or adequate plugs and screws.
You should have the vanity unit on site when your plumber is roughing in the water and waste points to ensure accuracy of your water points.
Vanity units are commonly installed at a height of 850-900mm from the finished floor. However wall hung vanity units can be installed at a different height if required.
All vanity cabinets are fully assembled when delivered. You will have to install the vanity's ceramic basin or crystallised glass vanity top as they are generally delivered in a separate box to the main cabinet. Your trades person should be careful to ensure that the pop-up waste is not over-tightened which can cause damage to the basin such as cracking. This damage is not covered under warranty.